Subversion Repositories group.electronics

# WinAVR cross-compiler toolchain is used here

CC = avr-gcc

OBJCOPY = avr-objcopy

DUDE = avrdude

# If you are not using ATtiny2313 and the USBtiny programmer, 

# update the lines below to match your configuration

CFLAGS = -Wall -Os -Iusbdrv -I. -mmcu=atmega168a

OBJFLAGS = -j .text -j .data -O ihex

DUDEFLAGS = -p atmega168 -P usb -c avrispmkii -v

# Object files for the firmware (usbdrv/oddebug.o not strictly needed I think)

#OBJECTS = usbdrv/usbdrv.o usbdrv/oddebug.o usbdrv/usbdrvasm.o main.o

OBJECTS = usbdrv/usbdrv.o usbdrv/usbdrvasm.o main.o twi.o wire.o util.o lcd.o

# Command-line client

CMDLINE = usbtest

# By default, build the firmware and command-line client, but do not flash

#all: main.hex $(CMDLINE)

all: main.hex 

# With this, you can flash the firmware by just typing "make flash" on command-line

flash: main.hex

	$(DUDE) $(DUDEFLAGS) -U flash:w:$<

# One-liner to compile the command-line client from usbtest.c

$(CMDLINE): usbtest.c

	gcc -I ./libusb/include -L ./libusb/lib/gcc -O -Wall usbtest.c -o usbtest -lusb

# Housekeeping if you want it

clean:

	$(RM) *.o *.hex *.elf usbdrv/*.o usbtest

# From .elf file to .hex

%.hex: %.elf

	$(OBJCOPY) $(OBJFLAGS) $< $@

# Main.elf requires additional objects to the firmware, not just main.o

main.elf: $(OBJECTS)

	$(CC) $(CFLAGS) $(OBJECTS) -o $@

# Without this dependance, .o files will not be recompiled if you change 

# the config! I spent a few hours debugging because of this...

$(OBJECTS): usbconfig.h hiddesc.h twi.h wire.h lcd.h util.h

# From C source to .o object file

%.o: %.c	

	$(CC) $(CFLAGS) -c $< -o $@

# From assembler source to .o object file

%.o: %.S

	$(CC) $(CFLAGS) -x assembler-with-cpp -c $< -o $@