| 7 |
pfowler |
1 |
/* Name: usbdrvasm15.inc
|
|
|
2 |
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
|
|
|
3 |
* Author: contributed by V. Bosch
|
|
|
4 |
* Creation Date: 2007-08-06
|
|
|
5 |
* Tabsize: 4
|
|
|
6 |
* Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
|
|
|
7 |
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
|
|
|
8 |
* Revision: $Id$
|
|
|
9 |
*/
|
|
|
10 |
|
|
|
11 |
/* Do not link this file! Link usbdrvasm.S instead, which includes the
|
|
|
12 |
* appropriate implementation!
|
|
|
13 |
*/
|
|
|
14 |
|
|
|
15 |
/*
|
|
|
16 |
General Description:
|
|
|
17 |
This file is the 15 MHz version of the asssembler part of the USB driver. It
|
|
|
18 |
requires a 15 MHz crystal (not a ceramic resonator and not a calibrated RC
|
|
|
19 |
oscillator).
|
|
|
20 |
|
|
|
21 |
See usbdrv.h for a description of the entire driver.
|
|
|
22 |
|
|
|
23 |
Since almost all of this code is timing critical, don't change unless you
|
|
|
24 |
really know what you are doing! Many parts require not only a maximum number
|
|
|
25 |
of CPU cycles, but even an exact number of cycles!
|
|
|
26 |
*/
|
|
|
27 |
|
|
|
28 |
;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes
|
|
|
29 |
;nominal frequency: 15 MHz -> 10.0 cycles per bit, 80.0 cycles per byte
|
|
|
30 |
; Numbers in brackets are clocks counted from center of last sync bit
|
|
|
31 |
; when instruction starts
|
|
|
32 |
|
|
|
33 |
;----------------------------------------------------------------------------
|
|
|
34 |
; order of registers pushed:
|
|
|
35 |
; YL, SREG [sofError] YH, shift, x1, x2, x3, bitcnt, cnt, x4
|
|
|
36 |
;----------------------------------------------------------------------------
|
|
|
37 |
USB_INTR_VECTOR:
|
|
|
38 |
push YL ;2 push only what is necessary to sync with edge ASAP
|
|
|
39 |
in YL, SREG ;1
|
|
|
40 |
push YL ;2
|
|
|
41 |
;----------------------------------------------------------------------------
|
|
|
42 |
; Synchronize with sync pattern:
|
|
|
43 |
;
|
|
|
44 |
; sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
|
|
|
45 |
; sync up with J to K edge during sync pattern -- use fastest possible loops
|
|
|
46 |
;The first part waits at most 1 bit long since we must be in sync pattern.
|
|
|
47 |
;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
|
|
|
48 |
;waitForJ, ensure that this prerequisite is met.
|
|
|
49 |
waitForJ:
|
|
|
50 |
inc YL
|
|
|
51 |
sbis USBIN, USBMINUS
|
|
|
52 |
brne waitForJ ; just make sure we have ANY timeout
|
|
|
53 |
;-------------------------------------------------------------------------------
|
|
|
54 |
; The following code results in a sampling window of < 1/4 bit
|
|
|
55 |
; which meets the spec.
|
|
|
56 |
;-------------------------------------------------------------------------------
|
|
|
57 |
waitForK: ;-
|
|
|
58 |
sbis USBIN, USBMINUS ;1 [00] <-- sample
|
|
|
59 |
rjmp foundK ;2 [01]
|
|
|
60 |
sbis USBIN, USBMINUS ; <-- sample
|
|
|
61 |
rjmp foundK
|
|
|
62 |
sbis USBIN, USBMINUS ; <-- sample
|
|
|
63 |
rjmp foundK
|
|
|
64 |
sbis USBIN, USBMINUS ; <-- sample
|
|
|
65 |
rjmp foundK
|
|
|
66 |
sbis USBIN, USBMINUS ; <-- sample
|
|
|
67 |
rjmp foundK
|
|
|
68 |
sbis USBIN, USBMINUS ; <-- sample
|
|
|
69 |
rjmp foundK
|
|
|
70 |
#if USB_COUNT_SOF
|
|
|
71 |
lds YL, usbSofCount
|
|
|
72 |
inc YL
|
|
|
73 |
sts usbSofCount, YL
|
|
|
74 |
#endif /* USB_COUNT_SOF */
|
|
|
75 |
#ifdef USB_SOF_HOOK
|
|
|
76 |
USB_SOF_HOOK
|
|
|
77 |
#endif
|
|
|
78 |
rjmp sofError
|
|
|
79 |
;------------------------------------------------------------------------------
|
|
|
80 |
; {3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for
|
|
|
81 |
; center sampling]
|
|
|
82 |
; we have 1 bit time for setup purposes, then sample again.
|
|
|
83 |
; Numbers in brackets are cycles from center of first sync (double K)
|
|
|
84 |
; bit after the instruction
|
|
|
85 |
;------------------------------------------------------------------------------
|
|
|
86 |
foundK: ;- [02]
|
|
|
87 |
lds YL, usbInputBufOffset;2 [03+04] tx loop
|
|
|
88 |
push YH ;2 [05+06]
|
|
|
89 |
clr YH ;1 [07]
|
|
|
90 |
subi YL, lo8(-(usbRxBuf)) ;1 [08] [rx loop init]
|
|
|
91 |
sbci YH, hi8(-(usbRxBuf)) ;1 [09] [rx loop init]
|
|
|
92 |
push shift ;2 [10+11]
|
|
|
93 |
ser shift ;1 [12]
|
|
|
94 |
sbis USBIN, USBMINUS ;1 [-1] [13] <--sample:we want two bits K (sample 1 cycle too early)
|
|
|
95 |
rjmp haveTwoBitsK ;2 [00] [14]
|
|
|
96 |
pop shift ;2 [15+16] undo the push from before
|
|
|
97 |
pop YH ;2 [17+18] undo the push from before
|
|
|
98 |
rjmp waitForK ;2 [19+20] this was not the end of sync, retry
|
|
|
99 |
; The entire loop from waitForK until rjmp waitForK above must not exceed two
|
|
|
100 |
; bit times (= 20 cycles).
|
|
|
101 |
|
|
|
102 |
;----------------------------------------------------------------------------
|
|
|
103 |
; push more registers and initialize values while we sample the first bits:
|
|
|
104 |
;----------------------------------------------------------------------------
|
|
|
105 |
haveTwoBitsK: ;- [01]
|
|
|
106 |
push x1 ;2 [02+03]
|
|
|
107 |
push x2 ;2 [04+05]
|
|
|
108 |
push x3 ;2 [06+07]
|
|
|
109 |
push bitcnt ;2 [08+09]
|
|
|
110 |
in x1, USBIN ;1 [00] [10] <-- sample bit 0
|
|
|
111 |
bst x1, USBMINUS ;1 [01]
|
|
|
112 |
bld shift, 0 ;1 [02]
|
|
|
113 |
push cnt ;2 [03+04]
|
|
|
114 |
ldi cnt, USB_BUFSIZE ;1 [05]
|
|
|
115 |
push x4 ;2 [06+07] tx loop
|
|
|
116 |
rjmp rxLoop ;2 [08]
|
|
|
117 |
;----------------------------------------------------------------------------
|
|
|
118 |
; Receiver loop (numbers in brackets are cycles within byte after instr)
|
|
|
119 |
;----------------------------------------------------------------------------
|
|
|
120 |
unstuff0: ;- [07] (branch taken)
|
|
|
121 |
andi x3, ~0x01 ;1 [08]
|
|
|
122 |
mov x1, x2 ;1 [09] x2 contains last sampled (stuffed) bit
|
|
|
123 |
in x2, USBIN ;1 [00] [10] <-- sample bit 1 again
|
|
|
124 |
andi x2, USBMASK ;1 [01]
|
|
|
125 |
breq se0Hop ;1 [02] SE0 check for bit 1
|
|
|
126 |
ori shift, 0x01 ;1 [03] 0b00000001
|
|
|
127 |
nop ;1 [04]
|
|
|
128 |
rjmp didUnstuff0 ;2 [05]
|
|
|
129 |
;-----------------------------------------------------
|
|
|
130 |
unstuff1: ;- [05] (branch taken)
|
|
|
131 |
mov x2, x1 ;1 [06] x1 contains last sampled (stuffed) bit
|
|
|
132 |
andi x3, ~0x02 ;1 [07]
|
|
|
133 |
ori shift, 0x02 ;1 [08] 0b00000010
|
|
|
134 |
nop ;1 [09]
|
|
|
135 |
in x1, USBIN ;1 [00] [10] <-- sample bit 2 again
|
|
|
136 |
andi x1, USBMASK ;1 [01]
|
|
|
137 |
breq se0Hop ;1 [02] SE0 check for bit 2
|
|
|
138 |
rjmp didUnstuff1 ;2 [03]
|
|
|
139 |
;-----------------------------------------------------
|
|
|
140 |
unstuff2: ;- [05] (branch taken)
|
|
|
141 |
andi x3, ~0x04 ;1 [06]
|
|
|
142 |
ori shift, 0x04 ;1 [07] 0b00000100
|
|
|
143 |
mov x1, x2 ;1 [08] x2 contains last sampled (stuffed) bit
|
|
|
144 |
nop ;1 [09]
|
|
|
145 |
in x2, USBIN ;1 [00] [10] <-- sample bit 3
|
|
|
146 |
andi x2, USBMASK ;1 [01]
|
|
|
147 |
breq se0Hop ;1 [02] SE0 check for bit 3
|
|
|
148 |
rjmp didUnstuff2 ;2 [03]
|
|
|
149 |
;-----------------------------------------------------
|
|
|
150 |
unstuff3: ;- [00] [10] (branch taken)
|
|
|
151 |
in x2, USBIN ;1 [01] [11] <-- sample stuffed bit 3 one cycle too late
|
|
|
152 |
andi x2, USBMASK ;1 [02]
|
|
|
153 |
breq se0Hop ;1 [03] SE0 check for stuffed bit 3
|
|
|
154 |
andi x3, ~0x08 ;1 [04]
|
|
|
155 |
ori shift, 0x08 ;1 [05] 0b00001000
|
|
|
156 |
rjmp didUnstuff3 ;2 [06]
|
|
|
157 |
;----------------------------------------------------------------------------
|
|
|
158 |
; extra jobs done during bit interval:
|
|
|
159 |
;
|
|
|
160 |
; bit 0: store, clear [SE0 is unreliable here due to bit dribbling in hubs],
|
|
|
161 |
; overflow check, jump to the head of rxLoop
|
|
|
162 |
; bit 1: SE0 check
|
|
|
163 |
; bit 2: SE0 check, recovery from delay [bit 0 tasks took too long]
|
|
|
164 |
; bit 3: SE0 check, recovery from delay [bit 0 tasks took too long]
|
|
|
165 |
; bit 4: SE0 check, none
|
|
|
166 |
; bit 5: SE0 check, none
|
|
|
167 |
; bit 6: SE0 check, none
|
|
|
168 |
; bit 7: SE0 check, reconstruct: x3 is 0 at bit locations we changed, 1 at others
|
|
|
169 |
;----------------------------------------------------------------------------
|
|
|
170 |
rxLoop: ;- [09]
|
|
|
171 |
in x2, USBIN ;1 [00] [10] <-- sample bit 1 (or possibly bit 0 stuffed)
|
|
|
172 |
andi x2, USBMASK ;1 [01]
|
|
|
173 |
brne SkipSe0Hop ;1 [02]
|
|
|
174 |
se0Hop: ;- [02]
|
|
|
175 |
rjmp se0 ;2 [03] SE0 check for bit 1
|
|
|
176 |
SkipSe0Hop: ;- [03]
|
|
|
177 |
ser x3 ;1 [04]
|
|
|
178 |
andi shift, 0xf9 ;1 [05] 0b11111001
|
|
|
179 |
breq unstuff0 ;1 [06]
|
|
|
180 |
didUnstuff0: ;- [06]
|
|
|
181 |
eor x1, x2 ;1 [07]
|
|
|
182 |
bst x1, USBMINUS ;1 [08]
|
|
|
183 |
bld shift, 1 ;1 [09]
|
|
|
184 |
in x1, USBIN ;1 [00] [10] <-- sample bit 2 (or possibly bit 1 stuffed)
|
|
|
185 |
andi x1, USBMASK ;1 [01]
|
|
|
186 |
breq se0Hop ;1 [02] SE0 check for bit 2
|
|
|
187 |
andi shift, 0xf3 ;1 [03] 0b11110011
|
|
|
188 |
breq unstuff1 ;1 [04] do remaining work for bit 1
|
|
|
189 |
didUnstuff1: ;- [04]
|
|
|
190 |
eor x2, x1 ;1 [05]
|
|
|
191 |
bst x2, USBMINUS ;1 [06]
|
|
|
192 |
bld shift, 2 ;1 [07]
|
|
|
193 |
nop2 ;2 [08+09]
|
|
|
194 |
in x2, USBIN ;1 [00] [10] <-- sample bit 3 (or possibly bit 2 stuffed)
|
|
|
195 |
andi x2, USBMASK ;1 [01]
|
|
|
196 |
breq se0Hop ;1 [02] SE0 check for bit 3
|
|
|
197 |
andi shift, 0xe7 ;1 [03] 0b11100111
|
|
|
198 |
breq unstuff2 ;1 [04]
|
|
|
199 |
didUnstuff2: ;- [04]
|
|
|
200 |
eor x1, x2 ;1 [05]
|
|
|
201 |
bst x1, USBMINUS ;1 [06]
|
|
|
202 |
bld shift, 3 ;1 [07]
|
|
|
203 |
didUnstuff3: ;- [07]
|
|
|
204 |
andi shift, 0xcf ;1 [08] 0b11001111
|
|
|
205 |
breq unstuff3 ;1 [09]
|
|
|
206 |
in x1, USBIN ;1 [00] [10] <-- sample bit 4
|
|
|
207 |
andi x1, USBMASK ;1 [01]
|
|
|
208 |
breq se0Hop ;1 [02] SE0 check for bit 4
|
|
|
209 |
eor x2, x1 ;1 [03]
|
|
|
210 |
bst x2, USBMINUS ;1 [04]
|
|
|
211 |
bld shift, 4 ;1 [05]
|
|
|
212 |
didUnstuff4: ;- [05]
|
|
|
213 |
andi shift, 0x9f ;1 [06] 0b10011111
|
|
|
214 |
breq unstuff4 ;1 [07]
|
|
|
215 |
nop2 ;2 [08+09]
|
|
|
216 |
in x2, USBIN ;1 [00] [10] <-- sample bit 5
|
|
|
217 |
andi x2, USBMASK ;1 [01]
|
|
|
218 |
breq se0 ;1 [02] SE0 check for bit 5
|
|
|
219 |
eor x1, x2 ;1 [03]
|
|
|
220 |
bst x1, USBMINUS ;1 [04]
|
|
|
221 |
bld shift, 5 ;1 [05]
|
|
|
222 |
didUnstuff5: ;- [05]
|
|
|
223 |
andi shift, 0x3f ;1 [06] 0b00111111
|
|
|
224 |
breq unstuff5 ;1 [07]
|
|
|
225 |
nop2 ;2 [08+09]
|
|
|
226 |
in x1, USBIN ;1 [00] [10] <-- sample bit 6
|
|
|
227 |
andi x1, USBMASK ;1 [01]
|
|
|
228 |
breq se0 ;1 [02] SE0 check for bit 6
|
|
|
229 |
eor x2, x1 ;1 [03]
|
|
|
230 |
bst x2, USBMINUS ;1 [04]
|
|
|
231 |
bld shift, 6 ;1 [05]
|
|
|
232 |
didUnstuff6: ;- [05]
|
|
|
233 |
cpi shift, 0x02 ;1 [06] 0b00000010
|
|
|
234 |
brlo unstuff6 ;1 [07]
|
|
|
235 |
nop2 ;2 [08+09]
|
|
|
236 |
in x2, USBIN ;1 [00] [10] <-- sample bit 7
|
|
|
237 |
andi x2, USBMASK ;1 [01]
|
|
|
238 |
breq se0 ;1 [02] SE0 check for bit 7
|
|
|
239 |
eor x1, x2 ;1 [03]
|
|
|
240 |
bst x1, USBMINUS ;1 [04]
|
|
|
241 |
bld shift, 7 ;1 [05]
|
|
|
242 |
didUnstuff7: ;- [05]
|
|
|
243 |
cpi shift, 0x04 ;1 [06] 0b00000100
|
|
|
244 |
brlo unstuff7 ;1 [07]
|
|
|
245 |
eor x3, shift ;1 [08] reconstruct: x3 is 0 at bit locations we changed, 1 at others
|
|
|
246 |
nop ;1 [09]
|
|
|
247 |
in x1, USBIN ;1 [00] [10] <-- sample bit 0
|
|
|
248 |
st y+, x3 ;2 [01+02] store data
|
|
|
249 |
eor x2, x1 ;1 [03]
|
|
|
250 |
bst x2, USBMINUS ;1 [04]
|
|
|
251 |
bld shift, 0 ;1 [05]
|
|
|
252 |
subi cnt, 1 ;1 [06]
|
|
|
253 |
brcs overflow ;1 [07]
|
|
|
254 |
rjmp rxLoop ;2 [08]
|
|
|
255 |
;-----------------------------------------------------
|
|
|
256 |
unstuff4: ;- [08]
|
|
|
257 |
andi x3, ~0x10 ;1 [09]
|
|
|
258 |
in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 4
|
|
|
259 |
andi x1, USBMASK ;1 [01]
|
|
|
260 |
breq se0 ;1 [02] SE0 check for stuffed bit 4
|
|
|
261 |
ori shift, 0x10 ;1 [03]
|
|
|
262 |
rjmp didUnstuff4 ;2 [04]
|
|
|
263 |
;-----------------------------------------------------
|
|
|
264 |
unstuff5: ;- [08]
|
|
|
265 |
ori shift, 0x20 ;1 [09]
|
|
|
266 |
in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 5
|
|
|
267 |
andi x2, USBMASK ;1 [01]
|
|
|
268 |
breq se0 ;1 [02] SE0 check for stuffed bit 5
|
|
|
269 |
andi x3, ~0x20 ;1 [03]
|
|
|
270 |
rjmp didUnstuff5 ;2 [04]
|
|
|
271 |
;-----------------------------------------------------
|
|
|
272 |
unstuff6: ;- [08]
|
|
|
273 |
andi x3, ~0x40 ;1 [09]
|
|
|
274 |
in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 6
|
|
|
275 |
andi x1, USBMASK ;1 [01]
|
|
|
276 |
breq se0 ;1 [02] SE0 check for stuffed bit 6
|
|
|
277 |
ori shift, 0x40 ;1 [03]
|
|
|
278 |
rjmp didUnstuff6 ;2 [04]
|
|
|
279 |
;-----------------------------------------------------
|
|
|
280 |
unstuff7: ;- [08]
|
|
|
281 |
andi x3, ~0x80 ;1 [09]
|
|
|
282 |
in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 7
|
|
|
283 |
andi x2, USBMASK ;1 [01]
|
|
|
284 |
breq se0 ;1 [02] SE0 check for stuffed bit 7
|
|
|
285 |
ori shift, 0x80 ;1 [03]
|
|
|
286 |
rjmp didUnstuff7 ;2 [04]
|
|
|
287 |
|
|
|
288 |
macro POP_STANDARD ; 16 cycles
|
|
|
289 |
pop x4
|
|
|
290 |
pop cnt
|
|
|
291 |
pop bitcnt
|
|
|
292 |
pop x3
|
|
|
293 |
pop x2
|
|
|
294 |
pop x1
|
|
|
295 |
pop shift
|
|
|
296 |
pop YH
|
|
|
297 |
endm
|
|
|
298 |
macro POP_RETI ; 5 cycles
|
|
|
299 |
pop YL
|
|
|
300 |
out SREG, YL
|
|
|
301 |
pop YL
|
|
|
302 |
endm
|
|
|
303 |
|
|
|
304 |
#include "asmcommon.inc"
|
|
|
305 |
|
|
|
306 |
;---------------------------------------------------------------------------
|
|
|
307 |
; USB spec says:
|
|
|
308 |
; idle = J
|
|
|
309 |
; J = (D+ = 0), (D- = 1)
|
|
|
310 |
; K = (D+ = 1), (D- = 0)
|
|
|
311 |
; Spec allows 7.5 bit times from EOP to SOP for replies
|
|
|
312 |
;---------------------------------------------------------------------------
|
|
|
313 |
bitstuffN: ;- [04]
|
|
|
314 |
eor x1, x4 ;1 [05]
|
|
|
315 |
clr x2 ;1 [06]
|
|
|
316 |
nop ;1 [07]
|
|
|
317 |
rjmp didStuffN ;1 [08]
|
|
|
318 |
;---------------------------------------------------------------------------
|
|
|
319 |
bitstuff6: ;- [04]
|
|
|
320 |
eor x1, x4 ;1 [05]
|
|
|
321 |
clr x2 ;1 [06]
|
|
|
322 |
rjmp didStuff6 ;1 [07]
|
|
|
323 |
;---------------------------------------------------------------------------
|
|
|
324 |
bitstuff7: ;- [02]
|
|
|
325 |
eor x1, x4 ;1 [03]
|
|
|
326 |
clr x2 ;1 [06]
|
|
|
327 |
nop ;1 [05]
|
|
|
328 |
rjmp didStuff7 ;1 [06]
|
|
|
329 |
;---------------------------------------------------------------------------
|
|
|
330 |
sendNakAndReti: ;- [-19]
|
|
|
331 |
ldi x3, USBPID_NAK ;1 [-18]
|
|
|
332 |
rjmp sendX3AndReti ;1 [-17]
|
|
|
333 |
;---------------------------------------------------------------------------
|
|
|
334 |
sendAckAndReti: ;- [-17]
|
|
|
335 |
ldi cnt, USBPID_ACK ;1 [-16]
|
|
|
336 |
sendCntAndReti: ;- [-16]
|
|
|
337 |
mov x3, cnt ;1 [-15]
|
|
|
338 |
sendX3AndReti: ;- [-15]
|
|
|
339 |
ldi YL, 20 ;1 [-14] x3==r20 address is 20
|
|
|
340 |
ldi YH, 0 ;1 [-13]
|
|
|
341 |
ldi cnt, 2 ;1 [-12]
|
|
|
342 |
; rjmp usbSendAndReti fallthrough
|
|
|
343 |
;---------------------------------------------------------------------------
|
|
|
344 |
;usbSend:
|
|
|
345 |
;pointer to data in 'Y'
|
|
|
346 |
;number of bytes in 'cnt' -- including sync byte [range 2 ... 12]
|
|
|
347 |
;uses: x1...x4, btcnt, shift, cnt, Y
|
|
|
348 |
;Numbers in brackets are time since first bit of sync pattern is sent
|
|
|
349 |
;We need not to match the transfer rate exactly because the spec demands
|
|
|
350 |
;only 1.5% precision anyway.
|
|
|
351 |
usbSendAndReti: ;- [-13] 13 cycles until SOP
|
|
|
352 |
in x2, USBDDR ;1 [-12]
|
|
|
353 |
ori x2, USBMASK ;1 [-11]
|
|
|
354 |
sbi USBOUT, USBMINUS ;2 [-09-10] prepare idle state; D+ and D- must have been 0 (no pullups)
|
|
|
355 |
in x1, USBOUT ;1 [-08] port mirror for tx loop
|
|
|
356 |
out USBDDR, x2 ;1 [-07] <- acquire bus
|
|
|
357 |
; need not init x2 (bitstuff history) because sync starts with 0
|
|
|
358 |
ldi x4, USBMASK ;1 [-06] exor mask
|
|
|
359 |
ldi shift, 0x80 ;1 [-05] sync byte is first byte sent
|
|
|
360 |
ldi bitcnt, 6 ;1 [-04]
|
|
|
361 |
txBitLoop: ;- [-04] [06]
|
|
|
362 |
sbrs shift, 0 ;1 [-03] [07]
|
|
|
363 |
eor x1, x4 ;1 [-02] [08]
|
|
|
364 |
ror shift ;1 [-01] [09]
|
|
|
365 |
didStuffN: ;- [09]
|
|
|
366 |
out USBOUT, x1 ;1 [00] [10] <-- out N
|
|
|
367 |
ror x2 ;1 [01]
|
|
|
368 |
cpi x2, 0xfc ;1 [02]
|
|
|
369 |
brcc bitstuffN ;1 [03]
|
|
|
370 |
dec bitcnt ;1 [04]
|
|
|
371 |
brne txBitLoop ;1 [05]
|
|
|
372 |
sbrs shift, 0 ;1 [06]
|
|
|
373 |
eor x1, x4 ;1 [07]
|
|
|
374 |
ror shift ;1 [08]
|
|
|
375 |
didStuff6: ;- [08]
|
|
|
376 |
nop ;1 [09]
|
|
|
377 |
out USBOUT, x1 ;1 [00] [10] <-- out 6
|
|
|
378 |
ror x2 ;1 [01]
|
|
|
379 |
cpi x2, 0xfc ;1 [02]
|
|
|
380 |
brcc bitstuff6 ;1 [03]
|
|
|
381 |
sbrs shift, 0 ;1 [04]
|
|
|
382 |
eor x1, x4 ;1 [05]
|
|
|
383 |
ror shift ;1 [06]
|
|
|
384 |
ror x2 ;1 [07]
|
|
|
385 |
didStuff7: ;- [07]
|
|
|
386 |
ldi bitcnt, 6 ;1 [08]
|
|
|
387 |
cpi x2, 0xfc ;1 [09]
|
|
|
388 |
out USBOUT, x1 ;1 [00] [10] <-- out 7
|
|
|
389 |
brcc bitstuff7 ;1 [01]
|
|
|
390 |
ld shift, y+ ;2 [02+03]
|
|
|
391 |
dec cnt ;1 [04]
|
|
|
392 |
brne txBitLoop ;1 [05]
|
|
|
393 |
makeSE0:
|
|
|
394 |
cbr x1, USBMASK ;1 [06] prepare SE0 [spec says EOP may be 19 to 23 cycles]
|
|
|
395 |
lds x2, usbNewDeviceAddr;2 [07+08]
|
|
|
396 |
lsl x2 ;1 [09] we compare with left shifted address
|
|
|
397 |
;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
|
|
|
398 |
;set address only after data packet was sent, not after handshake
|
|
|
399 |
out USBOUT, x1 ;1 [00] [10] <-- out SE0-- from now 2 bits==20 cycl. until bus idle
|
|
|
400 |
subi YL, 20 + 2 ;1 [01] Only assign address on data packets, not ACK/NAK in x3
|
|
|
401 |
sbci YH, 0 ;1 [02]
|
|
|
402 |
breq skipAddrAssign ;1 [03]
|
|
|
403 |
sts usbDeviceAddr, x2 ;2 [04+05] if not skipped: SE0 is one cycle longer
|
|
|
404 |
;----------------------------------------------------------------------------
|
|
|
405 |
;end of usbDeviceAddress transfer
|
|
|
406 |
skipAddrAssign: ;- [03/04]
|
|
|
407 |
ldi x2, 1<<USB_INTR_PENDING_BIT ;1 [05] int0 occurred during TX -- clear pending flag
|
|
|
408 |
USB_STORE_PENDING(x2) ;1 [06]
|
|
|
409 |
ori x1, USBIDLE ;1 [07]
|
|
|
410 |
in x2, USBDDR ;1 [08]
|
|
|
411 |
cbr x2, USBMASK ;1 [09] set both pins to input
|
|
|
412 |
mov x3, x1 ;1 [10]
|
|
|
413 |
cbr x3, USBMASK ;1 [11] configure no pullup on both pins
|
|
|
414 |
ldi x4, 3 ;1 [12]
|
|
|
415 |
se0Delay: ;- [12] [15]
|
|
|
416 |
dec x4 ;1 [13] [16]
|
|
|
417 |
brne se0Delay ;1 [14] [17]
|
|
|
418 |
nop2 ;2 [18+19]
|
|
|
419 |
out USBOUT, x1 ;1 [20] <--out J (idle) -- end of SE0 (EOP sig.)
|
|
|
420 |
out USBDDR, x2 ;1 [21] <--release bus now
|
|
|
421 |
out USBOUT, x3 ;1 [22] <--ensure no pull-up resistors are active
|
|
|
422 |
rjmp doReturn ;1 [23]
|
|
|
423 |
;---------------------------------------------------------------------------
|