Subversion Repositories group.electronics

/* Name: usbconfig.h
 * Project: AVR USB driver
 * Author: Christian Starkjohann
 * Creation Date: 2007-06-23
 * Tabsize: 4
 * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
 * License: GNU GPL v2 (see License.txt) or proprietary (CommercialLicense.txt)
 * This Revision: $Id$
 */

#ifndef __usbconfig_h_included__
#define __usbconfig_h_included__

/* ---------------------------- Hardware Config ---------------------------- */

#define USB_CFG_IOPORTNAME      B
#define USB_CFG_DMINUS_BIT      1
#define USB_CFG_DPLUS_BIT       2
#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)

/* ----------------------- Optional Hardware Config ------------------------ */

/* #define USB_CFG_PULLUP_IOPORTNAME   D */
/* #define USB_CFG_PULLUP_BIT          4 */

/* --------------------------- Functional Range ---------------------------- */

#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
#define USB_CFG_HAVE_INTRIN_ENDPOINT3   0
#define USB_CFG_IMPLEMENT_HALT          0
#define USB_CFG_INTR_POLL_INTERVAL      10
#define USB_CFG_IS_SELF_POWERED         0
#define USB_CFG_MAX_BUS_POWER           100
#define USB_CFG_IMPLEMENT_FN_WRITE      0
#define USB_CFG_IMPLEMENT_FN_READ       0
#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
#define USB_CFG_HAVE_FLOWCONTROL        0

#ifndef __ASSEMBLER__
extern void usbEventResetReady(void);
#endif
#define USB_RESET_HOOK(isReset)             if(!isReset){usbEventResetReady();}
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   1

/* -------------------------- Device Description --------------------------- */

#define  USB_CFG_VENDOR_ID       0x42, 0x42
#define  USB_CFG_DEVICE_ID       0x31, 0xe1
#define USB_CFG_DEVICE_VERSION  0x00, 0x02
#define USB_CFG_VENDOR_NAME     'n', 'e', 'w', 'i', 'o', 'i', 't', '.', 'c', 'o', 'm', '.', 'a', 'u'
#define USB_CFG_VENDOR_NAME_LEN 14
#define USB_CFG_DEVICE_NAME     'S', 'a', 'i', 't', 'e', 'k', ' ', 'T', 'r', 'i', 'm', ' ', 'W', 'h', 'e', 'e', 'l'
#define USB_CFG_DEVICE_NAME_LEN 17
/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
#define USB_CFG_DEVICE_CLASS        0
#define USB_CFG_DEVICE_SUBCLASS     0
#define USB_CFG_INTERFACE_CLASS     3   /* HID */
#define USB_CFG_INTERFACE_SUBCLASS  0   /* no boot interface */
#define USB_CFG_INTERFACE_PROTOCOL  0   /* no protocol */
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    46  /* total length of report descriptor */
/* #define USB_PUBLIC static */

/* ------------------- Fine Control over USB Descriptors ------------------- */

#define USB_CFG_DESCR_PROPS_DEVICE                  0
#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
#define USB_CFG_DESCR_PROPS_STRINGS                 0
#define USB_CFG_DESCR_PROPS_STRING_0                0
#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
#define USB_CFG_DESCR_PROPS_HID                     0
#define USB_CFG_DESCR_PROPS_HID_REPORT              0
#define USB_CFG_DESCR_PROPS_UNKNOWN                 0

/* ----------------------- Optional MCU Description ------------------------ */

/* #define USB_INTR_CFG            MCUCR */
/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
/* #define USB_INTR_CFG_CLR        0 */
/* #define USB_INTR_ENABLE         GIMSK */
/* #define USB_INTR_ENABLE_BIT     INT0 */
/* #define USB_INTR_PENDING        GIFR */
/* #define USB_INTR_PENDING_BIT    INTF0 */

#endif /* __usbconfig_h_included__ */